Updated by Damon on 2025/07/09:
- Default login password removed; users now set it during first login.
- Default IP updated to 192.168.131.1.
- Added login password change guide.
- Screenshots updated to match the latest interface.
Please follow the updated steps below for your VSOL router setup.
How to Log in to Your VSOL Router
VSOL routers now have no default login password. On your first login, you will enter the Quick Configuration Guide to set your login password, network, and Wi-Fi. Follow these steps:
Step 1. Install your VSOL router and connect your device to it via Wi-Fi.
Step 2. Open a web browser and enter the router’s IP address in the address bar (default: 192.168.131.1).
Step 3. The Quick Configuration Guide will appear. Follow the prompts to configure your Mesh, network, and Wi-Fi settings. Then set your login password on the User Management page.
Step 4. Complete the remaining settings and wait for the configuration to take effect. After the Wi-Fi restarts, reconnect your device to the VSOL router.
Step 5. Visit 192.168.131.1 again and log in using the password you set in Step 3.
How to Change Your VSOL Router Login Password
Step 1. Log in to the router’s web interface at 192.168.131.1.
Step 2. Go to Config Panel > Advanced Mode > Management > User Management.
Step 3. Enter your new login password for the VSOL router (note: this is not your Wi-Fi password) and confirm it.
Step 4. Click Submit to save the changes.
How to Change Your VSOL Router Wi-Fi Name and Password
Step 1. Log in to the router’s web interface at 192.168.131.1.
Step 2. Click on the Wi-Fi Config icon.
Step 3. Enter your desired Wi-Fi name (SSID) and password, then click Submit to apply the changes.
Note: When Adaptive Wi-Fi is enabled, the 2.4 GHz and 5 GHz bands will share the same name and password. Your devices will automatically switch between bands based on signal strength and conditions.
