Categories
ICT

Optical Amplifier - 4port WDM

Item No.: V8616W-4P
The V8616Y Series Ytterbium and Erbium Doped Fiber Amplifiers (YEDFA) is designed for use in CATV、 FTTX and HFC application. It is optimized for 1550nm wavelength and is packaged in a 2U 19” rack housing.
  • Size: 88mm*483mm*422mm
  • Weight: 5.5kg
  • Description Features parameters  Application
       Product introduction
    The V8616Y Series Ytterbium and Erbium Doped Fiber Amplifiers (YEDFA) is designed for use in CATV、 FTTX and HFC application. It is optimized for 1550nm wavelength and is packaged in a 2U 19” rack housing. The product offering is flexible enough to perform all the requirements of CATV、FTTX and HFC applications. The device chooses a high performance PUMP laser and circuit (include ACC and APC) and optical output power is adjustable and flexible for network link loss budget. The V8616Y series also provide monitors and associated alarms for all vital characteristics. The status and management of the device can be monitored and managed either from the VFD front panel display or remotely via Ethernet based-SNMP .  The device also support multipul optical output by build-in PLC splitter and FWDM (1310nm1490nm) optical multiplexer for Triple-play FTTX network applications.
       Product photo show

       Special Features
     ► Standard 19 inch 2U Rack YEDFA
     ► Output port from 4-64ports optional
     ► Output powers rang from 27~40dBm optional
     ► Output power adjustable -3~0dB
     ► Wide input dynamic range(-5 to +10dBm)
     ► High Isolated input & output(30dB for max)
     ► Low power consumption
     ► Front Panel Key Switch for pump on/off control
     ► FWDM optional
     ► Automatic Power Control (APC) or Automatic Current Control (ACC)
     ► VFD Panel Status Indicator for local monitor
     ► Remote management via SNMP (Ethernet Interface)
      Technical parameters
    Description Unit Value Conditions / Notes
    Optical Specifications
    Wavelength nm 1530~1560  
    Input Power dBm -5~10 1550nm
    Output Power dBm 24~40 @+6dBm Input
    Output Power Stability dB 0.1 @+6dBm Input
    Noise Figure dB  4(max 5) @+6dBm Input
    Isolation (Input/Output) dB 30  
    Return Loss (Input/Output) dB 55  
    Polarization Dependent Gain dB max 0.5  
    Polarization Mode Dispersion ps max 0.5  
    Electrical Specifications
    Communication Interface   RJ45, RS-232 9600bps
    Input voltage VAC 90-265 -12/-48 V DC(optional)
    Consumption W 15 maximum  
    Fuse A 2  
    Connector IEC Male power connector  
    Environmental Specifications
    Operating Temperature -5 ~55  
    Storage Temperature -25 ~70  
    Storage Humidity RH% ≤95 No Condensation
    Mechanical Specifications
    Dimension   (HxWxD) mm 88 ´ 483 ´ 422  
    Weight kg < 6  
    Mounting   19” EIA rack, 2U Rack 4out is 1U
       Application Chart

     

    yedfa

    Review

    Copyright © 2019 vsolcn.com - All Rights Reserved.